Menu
The Coatings Solutions SPI Product Lineup For 2023
Enamo Grip is a two-part aliphatic polyurethane enamel available in clear and colors. It forms a uniquely hard and durable coating film, which demonstrates unsurpassed semi-gloss and color retention, as well as chalk resistance when used in exterior applications. It is resistant to water and humidity, stains, acids, solvents, and chemicals, as well as having tremendous scuff, mar and impact resistance. Enamo Grip will self-level to an even and smooth finish. Download Documents
Enamo Grip 5000 is a two component polyester high solids coating for protection against vapors, acid rain, and other harsh chemical environments while giving a car-like finish and UV protection. Can withstand Skydrol® hydraulic fluids used in aircraft when applied to flooring. Available in clear and custom colors. Download Documents
Enamo Grip SAS is a two-part aliphatic polyurethane enamel, based on the same chemistry as the base formula of Enamo Grip, yet designed using a proprietary system to give the slick surface for resisting attachment of damp chemical compounds inside industrial tubes or resisting barnacle and algae attachment on boat hulls. Enamo Grip SAS will self-level to an even and smooth finish. It is tough enough to withstand the abrasion of wind or water movements. Download Documents
HPC® Coating is designed to control heat transfer on surface temperatures up to 482°F (250°C). It is water-borne and extremely lightweight in appearance. HPC® Coating uses a special acrylic resin blend with specific ceramic compounds added to provide a non-conductive block against heat transfer. HPC® Coating offers a “Green”, non-flammable, non-toxic formula for high heat surface applications over standard steam pipe or oven wall construction. HPC® Coating is easily applied using a texture sprayer, and can be applied over metal, concrete, wood, and other substrates.
If HPC® Coating is to be applied over flat steel surfaces, see manufacturer for instructions. Download Documents
HPC®-HT is a two-part hybrid silicone/solvent resin (Part B is flammable) and (Part A is water-based resins) using specific ceramic compound loads for application directly over surface temps of 250°C (482°F) and up to 600°C (1112°F). It was designed to block and hold the interior temperature on the surface and reduce heat transfer loss to ambient. After Part A and Part B are blended together, HPC®-HT Coating offers a ‘green’, nonflammable, non-toxic formula for high-heat surface applications. HPC®-HT is easily applied, and can be sprayed direct to metal, concrete and other high-temperature surfaces up to 600°C. Download Documents
HPC®-HT Primer is a single-component resin, water-based coating using specific ceramic fiber loads for application directly over surfaces 200°C (392°F) and up to 600°C (1112°F). It was designed to provide the initial adhesion over extremely hot surfaces before the heavier-loaded HT is applied. HPC®-HT Primer offers a ‘green’, nonflammable, non-toxic formula for high-heat surface priming. HPC®-HT Primer is easily applied, and can be applied direct to metal, concrete and other high- temperature surfaces. It will seal and block CUI over hot surfaces. Download Documents
HSC® Coating is designed to control heat transfer on surface temperatures up to 350°F degrees (176°C). It is water-borne, and extremely lightweight and smooth in appearance. HSC® Coating uses a special acrylic resin7. blend with specific ceramic compounds added to provide a non-conductive block against heat transfer. HSC® Coating offers a “Green”, non-flammable, non- toxic formula for medium heat surface applications over standard steam pipe or oven wall construction. The coating was originally designed for hot applications where temperature exposures fall below those that would require the use of HPC® Coating. HSC® Coating is more easily applied for a smooth finish. It can be applied over metal, concrete, wood, and other substrates. Download Documents
Lining Kote UHS is a two-part pigmented epoxy coating, which will produce a hard, tough coating film. Designed for use on the interior of tanks, this epoxy coating was built to resist the toughest acid, chemical or solvent environments. Lining Kote UHS has outstanding adhesion and can withstand direct impact. It is resistant to water, humidity and high heat. Lining Kote UHS is made with a high molecular weight base and cure for strength and durability. Download Documents
Mastic Sealing Tape is a self-adhering, flexible membrane used to seal seams, cracks, and holes in surface to create an excellent substrate before applying acrylic coatings. Mastic Sealing Tape is a unique formulation of premium grade bituminous resin modified with synthetic resins. It is designed with an easy, peel- off paper backing to expose a highly adhesive bottom side and then placed over a clean, dry, and sound surface. The topside has a polyester mesh fabric built-in for strength and flexibility. Mastic Sealing Tape is inert and inorganic, and will never rot, decay, or be affected by bacteria or fungus. Available in 4 inch to 36 inch width rolls, 67 feet long.
Moist Metal Grip is a two-part epoxy coating system that has been specifically designed with specific additives to promote adhesion when used on metal. Moist Metal Grip was developed to be applied to metal surfaces that cannot be dry enough to use Rust Grip®. It can be used directly to wet or damp metal surfaces and maintain excellent adhesion to prevent further surface corrosion. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and is designed to be applied directly to concrete, masonry and wood. Download Documents
Multi Mesh Membrane is a polyester membrane used with Super Base (HS) for more difficult areas to spread over and seal before coating with Super Therm®.
Omega Fire is a single component coating having a blend of seven different ceramics combined in a water-based, acrylic/hybrid modified silicone formula to create a barrier against extreme flame impingement and heat migration. The coating can withstand direct flame up to 2200°F (1204°C) by hardening on the surface at first contact, while continuing to provide the necessary insulation value. The resin blend binds the compounds together and forms a char causing a matrix with the ceramics across the face of the coating, facing the flame. Omega Fire is designed to stay intact with constant adhesion at extreme temperatures, while remaining flexible. In this way, it can move with the surface, during expansion and contraction, without cracking and falling off as the substrate moves. Download Documents
Rust Grip® is a three-coats-in-one system that acts as a primer, intermediate, and topcoat with a single application.
Rust Grip® is a tough, one-part, moisture-cure polyurethane coating that absorbs atmospheric moisture to cure. Rust Grip® is loaded with a metallic pigment for strength and is also resistant to chemical solvents and acid splash. Upon curing, Rust Grip® provides a protective coating film of superior adhesion and flexibility, and is resistant to abrasion and impact.
Rust Grip® can be used as a primer or as a one-coating system. It is patented to encapsulate lead-based paints and other toxic materials, including asbestos. Rust Grip® can be applied over pressure-washed, completely dry flash rust and firmly bonded commercial paints. In most cases, a white or near-white blasting is not required. A light to medium surface rust is preferred as the profile. Download Documents
APC Stripable Base is a single component, water- based coating designed to be a strippable base for bare or painted metal, painted concrete, masonry, high-density plastic and wood. It offers a dual ability to adhere to a surface and to have a top-coat applied, while allowing itself to be sliced to break the surface tension and be removed months or years later. Download Documents
SP Liquid Membrane is a tough, one-part elastomeric hydrocarbon rubber compound coating that is loaded with a ceramic pigment for strength. Upon curing, SP Liquid Membrane provides a protective coating film of superior adhesion and flexibility, and is resistant to abrasion and impact. SP Liquid Membrane can be used as a primer, as a one-coating system or as a topcoat to seal Super Therm from ponding water. SP Liquid Membrane can be applied over pressure-washed substrate of TPO, EPDM, PVC, wood, concrete or metal. Download Documents
SP Seal Coat is a one component coating that combines three high performance water-borne resins.
The coating is designed using a high quality elastomeric and a self-cross-linking resin system for long life and weathering, as well as against water that ponds, and having good dirt release. SP Seal Coat is used as a topcoat over Super Therm, HPC or other base materials. It remains flexible and is resistant to mold and mildew. Sp Seal Coat can be applied over most firmly bonded paints or foams. Allow the base coat to dry before applying the SP Seal Coat. Download Documents
Super Base/HS is a one-part water-based acrylic coating that is easily applied without environmental concerns, and used as a base coat for either Super Therm® or Sunshield. Super Base/HS can be used as a base coat to seal tar, asphalt, shingles, rubber, concrete, or wood roofs. Download Documents
Sunshield is a water-borne combination of high-performance duo of elastomeric acrylics and resin additives, which produces a tough, yet flexible coating film. It combines four different ceramics that provide both heat reflectivity and heat-blocking properties. Sunshield is a flexible membrane with low permeability that can greatly reduce expansion and contraction of a roof. Sunshield’s blend of resin additives produce a flexible coating membrane that can be applied directly to any surface. It also prevents corrosion and surface deterioration. Although durable and offering solar blocking performance, Sunshield does not give the same benefits as Super Therm®. Download Documents
Super Therm® is a water-borne combination of high-performance aliphatic urethanes, elastomeric acrylics, and resin additives which produces a tough, yet flexible coating film. Designed for performance and durability, Super Therm® contains 4 unique ceramics to block up to 95% of Solar Radiational Heat entering a structure due to Visual Light, Ultra Violet (UV), and Infrared (IR). Super Therm® is a flexible membrane with low permeability that can greatly reduce expansion and contraction of a roof (eliminate thermal shock) and prevent corrosion and surface deterioration.
Super Therm® blocks the heat at the surface, before it can penetrate inside! Download Documents